Braaap MotoE 10000W, User Manual

Page: 19 / 35

- 19 -
If the alarm is in active mode
The alarm is activated via the lock button on the FOB, and the ignition is
turned on, the alarm will sound. When the ignition is turned on while the
alarm is activated, it will light up the dashboard momentarily.
If the alarm activated via the FOB and the brakes are applied, the dashboard
may light up momentarily. This is not a fault.
If the alarm is activated and the rider kicks the stand up before deactivating
the alarm, the alarm will sound four times.
All these things are not faults with the bike, they are a pre-alert condition and
are perfectly normal occurrences.
Side stand
If the side stand is down, to park the bike, and the ignition is on, the brake
light will be activated. If the rider applies the brakes while the side stand is
down, the brake light will already be activated and will not increase the
brightness of the brake light.
This is not a fault and is a perfectly normal occurrence.
Recommended treatment of FOB
We suggest it is not a good idea to leave the key FOB dangling off
your ignition keys, as potential swaying in the wind can cause
damage to the delicate internal electronics by it hitting into different
parts of the bike. Suggest carrying it in pocket or secure to top triple
clamp via Velcro or something similar.