BR-Automation Automation PC 820, User Manual, Page: 77 / 252

Commissioning • Installation
Chapter 3
Com
m
is
sio
ning
77 Automation PC 820 User's Manual V 1.00
1.2.2 Cold-plate installation
The excessive heat that is generated by the devices is output directly to the cooling medium via
a plate cooled with oil or water. Suitable for a large number of axes with any range of power rating
and a machine's own cooling circulation system.
The mounting surface for the mounting plate must provide sufficient stability for the mounting
plate and also be non-flammable, level and free of contaminants.
Connection of supply and return lines
The position of the connections for supply and return lines can be found in the installation
diagram. This can found in the ACOPOSmulti manual, which can be downloaded for free from
the B&R homepage (
www.br-automation.com ).
Caution!
The feed must be connected to the bottom connector of the mounting plate.
The return line must be connected to the top connector of the mounting plate.