BR-Automation Automation PC 820, User Manual, Page: 209 / 252

Accessories • USB flash drive
Chap
ter 6
Accessories
209 Automation PC 820 User's Manual V 1.00
7.3 Technical data
Information:
The following characteristics, features and limit values only apply to this accessory
and can deviate those specified for the entire device. For the entire device where
this accessory is installed, refer to the data provided specifically for the entire
device.
Features 5MMUSB.2048-00
LED 1 LED (green), signals data transfer (send and receive)
Power supply
Current requirements
Via the USB port
650 µA sleep mode, 150 mA read/write
Interface
Type
Transfer rate
Sequential reading
Sequential writing
Connection
USB specification 2.0 high speed device, mass storage class, USB-IF and WHQL certified
USB 1.1 and 2.0 compatible
Up to 480 MBit (high speed)
Max. 8.7 MB/second
Max. 1.7 MB/second
To each USB type A interface
MTBF (at 25°C) 100000 hours
Data retention 10 years
Maintenance None
Operating system support Windows CE 4.2, CE 5.0, ME, 2000, XP and Mac OS 9.1.x+, OS X v10.1.2+
Mechanical characteristics
Dimensions
Length
Width
Thickness 52.2 mm
19 mm
7.9 mm
Environmental characteristics
Ambient temperature
Operation
Bearings
Transport 0 to +45°C
-20 to +60°C
-20 to +60°C
Relative humidity
Operation
Bearings
Transport 10 to 90%, non-condensing
5 to 90%, non-condensing
5 to 90%, non-condensing
Vibration
Operation
Bearings
Transport At 10 - 500 Hz: 2 g (19.6 m/s
2
0 peak), oscillation rate 1/minute
At 10 - 500 Hz: 4 g (39.2 m/s
2
0 peak), oscillation rate 1/minute
At 10 - 500 Hz: 4 g (39.2 m/s
2
0 peak), oscillation rate 1/minute
Shock
Operation
Bearings
Transport Max. 40 g (392 m/s
2
0-peak) and 11 ms length
Max. 80 g (784 m/s
2
0-peak) and 11 ms length
Max. 80 g (784 m/s
2
0-peak) and 11 ms length
Table 170: Technical data - USB flash drive 5MMUSB.2048-00