8
Per channel:
Function
Object name
Type
Prio
Flags
Behaviour
Channel X
Switch object
1 bit
Low
CW
Receive
Parameters
Per channel: Switch on the ON delay.
Channel X: General
Parameter
Setting
ON delay
switched on
switched off
Per channel: Set the ON delay.
Channel X: Times
Parameter
Setting
Time base for ON delay -
100 ms
1 s
1 min
1 hr
Factor for ON delay
(1-255)
3
adjustable in single steps
ON delay is
not retriggerable
retriggerable
- OFF delay
The output is switched off without a delay. The delay can be
parameterised. The delay period is calculated by multiply-
ing a base value with a factor. The set period can be defined
via parameter as “retriggerable” or “not retriggerable”. In
the case of retriggerable time delays, the delay is restarted
on receipt of a “0” telegram (switch object). If the delay is
not retriggerable, the relay is opened once the period has
elapsed.
If the output of the actuator is forced into a new switching
position by a higher priority function while a delay is still
running, the relay is switched without a delay.
Retriggerable OFF delay
t
t
1
t off
1
0
0
1
0
t off
1
0
t off
t off
KNX
telegram
Status
actuated
not actuated
Per channel: Set the central switching function.
Central function
Parameter
Setting
Channel X
OFF at 0 or 1
ON at 0 or 1
ON at 0 / OFF at 1
OFF at 0 / ON at 1
OFF at 0 / no reaction at 1
ON at 0 / no reaction at 1
no reaction at 0 / OFF at 1
no reaction at 0 / ON at 1
no reaction at 0 or 1
Time functions
- ON delay
The output is switched on with a delay. The delay can be
parameterised. The delay period is calculated by multiply-
ing a base value with a factor. The set period can be defined
via parameter as “retriggerable” or “not retriggerable”. In
the case of retriggerable time delays, the delay is restarted
on receipt of a “1” telegram (switch object). If the delay is
not retriggerable, the relay is opened once the period has
elapsed.
If the output of the actuator is forced into a new switching
position by a higher priority function while a delay is still
running, the relay is switched without a delay.
Retriggerable ON delay
Non-retriggerable ON delay
Actuated
The relay is closed in the make function. The relay is opened
in the break function.
Communication objects
The following communication objects can be selected:
t
t
1
t on
0
1
0
1
1
t on
t on
t on
KNX
telegram
Status
actuated
not actuated
t
t
1
t off
1
0
0
1
0
t off
1
0
t off
KNX
telegram
Status
actuated
not actuated
