bpr Rotax 912 i Series, Maintenance Manual, Page: 355 / 458

Effectivity: 912 i Series
Edition 1/Rev. 3
d
066
74.
fm
MAINTENANCE MANUAL
BRP-Powertrain
76-10-00
Page 39
July 01/2018
Fig. 48
FUSES
If a fuse is damaged, it must be replaced by a
new one with the same values.
The fuses are situated in the fuse box.
Fig. 49
ATTACHMENT OF COVER
1. Cable BLACK 2. Cable BLACK
3. Washer 6.4 4. Lock nut M6
5. Cup nut of the gasket
screw connection
m
WARNUNG
m
WARNING
A fuse with a higher amperage must not be
used, as this can lead to severe damage.
Arrangement of the fuses
F2 7.5 A Selector switch B
F3 7.5 A Selector switch A
F4 10 A Fuel pump B
F5 10 A Fuel pump A
F6 10 A Ignition 3t
F7 10 A Ignition 1b
F8 10 A Ignition 3b
F9 10 A Ignition 1t
F10 5 A Injector 4
F11 5 A Injector 3
F12 5 A Injector 2
F13 5 A Injector 1
F14 2 A Caution lamp A
F15 2 A Caution lamp B
F16 5 A Injector 8
F17 5 A Injector 7
F18 5 A Start switch
F19 Not used
F20 20 A ATO fuse
F21 35 A ATO fuse
F22 5 A Injector 6
F23 5 A Injector 5
1. Reserve fuses
m
WARNUNG
NOTICE
Over tightening the hex screws M4 leads to a
rupture of the cover.
Step Procedure
1 Tighten cover with 9 hex screws M4.
Internal hex key A/F 3 mm.
NOTE: Before attaching the cover,
check the correct position of the
gasket.
Arrangement of the fuses
1