bpr Rotax 912 i Series, Maintenance Manual, Page: 177 / 458

Effectivity: 912 i Series
Edition 1/Rev. 0
d
053
44.
fm
MAINTENANCE MANUAL
BRP-Powertrain
72-20-00
Page 9
July 01/2012
ASSEMBLY
ASSEMBLY OF THE SPRAG CLUTCH
HOUSING
Fig. 13
NOTE:
To assemble it, compress it slightly
with Seeger ring pliers and ensure
that the Seeger ring remains in posi-
tion and latches completely with the
noses in the sprag clutch body.
Fig. 14
Step Procedure
1 Clean the cone of the sprag clutch hous-
ing with a cloth.
2 Apply KLUEBER ISOFLEX TOPAS to the
spear body.
1. Cone 2. Sprag clutch housing
3. Sprag clutch 4. Spear body
Step Procedure
3 Place the sprag clutch in the sprag clutch
housing; the Seeger ring must be visible.
4 Install the circlip so that its chamfer faces
the sprag clutch.
1. Sprag clutch 2. Seeger ring
3. Circlip