background image

B4-1KB 

B4-1KB

   

 

Rear Panel 

 

 

 

 

 

 

 

 

 

 

 

 

Fuse. 

 

Inlet of city power. 

 

RS-232 port (DB-9). 

 

Outlet(s) (NEMA/IEC). 

 

 

 

 

 

 

 

 

 

 

 

9.  IMPORTANT SAFETY INSTRUCTIONS 

When replacing the batteries, use the same number and the same 
type of batteries. 

Do not dispose of batteries in a fire; the battery may explode. 

Do not open or mutilate the battery or batteries, released 
electrolyte is harmful to the skin and eyes. 

A battery can present a risk of electric shock and high short circuit 
current. The following precaution should be observed when 
working on batteries. 

* Remove watches, rings or other metal objects. 

* Use tools with insulated handles. 

To prevent an  overbalance of this unit, with the installation the 
additional stabilizer are to mount at the bottom side. 

This unit should be installed from service personnel. 

The equipment can be operated by any individuals without any 
previous experience. 

“The socket-outlet shall be installed near the equipment and easily 
accessible.” 

“With the installation of this equipment it should be prevented, that 
the sum of the leakage current of the UPS an the connected 
consumer does not exceed 3.5mA.” 

Attention, 

hazardous through electric shock. Also with 

disconnection of this unit from the main, hazardous voltage still 
may be accessible through supply from battery. 

The battery supply should be therefore disconnected in the plus 
and minus pole through the from  the outer enclosure accessible 
battery fuses when maintenance or service work inside the UPS is 
considered. 

The lead acid battery may cause chemical hazard. 

The battery presents a risk of electric shock and energy hazard. 

Batteries will be disposed by the manufacturer or importer. 
Customers need to send them back with no charge for disposal. 

Electrical hazard, the discharge time is about 5 min. 

 

 

 

 

 

3                                                                                     12 

 

 

 

 

 

NEMA Type 

IEC Type 

Summary of Contents for PowerStar series 1200









Reviews: