4.2 Install mirror monitor on the plate
When the camera needs to be installed at the rear of vehicle, a good
position is usually at the top of the license plate where there is an under
ledge.
vehicle. There are many methods to remove the original rear view
Tech America, Inc. will not be responsible for any damage caused to
your car by improper installation of the mirror.
5
How to Install Reverse Camera
Rearview mirror monitor
1BAM 2XX
Camera
License Plate
Genera l insta lla on loca on
Two ball joints bracket Screw (M5X19) Adapter Screw (M6X8) Long Screwdriver Short Scredriver
Put the screw(M5*19) in the
pipeline of the two ball joints
bracket
Connecting the two ball joints
bracket and rearview mirror by
using the screw and screwdriver
Rotate the screwdriver clockwise,
and fix the two ball joints bracket
and rearview mirror
Finish the first step, then need to
fix the adapter to bracket
Connecting the rearview mirror
bracket and adapter, then fixed
the screw of adapter
Clockwise rotary screwdriver, to
ensure the bottom block is fixed
tightly on the bracket
