WWW.VISIONTECHAMERICA.COM
2
8
3. METAL SQUARE BRACKET MOUNT ASSEMBLY
4. METAL FLUSH MOUNT ASSEMBLY
6. RUBBER ANGLE MOUNT ASSEMBLY
USER’S MANUAL
MODEL: VTK501HD
5 IN 1 CAMERA SYSTEM
7. LICENSE PLATE MOUNT ASSEMBLY
CAMERA
CAMERA
CAMERA
CAMERA
LICENSE PLATE MOUNT
RUBBER ANGLE MOUNT
METAL ANGLE MOUNT
SQUARE MOUNT
5. METAL ANGLE MOUNT ASSEMBLY
METAL SQUARE MOUNT
METAL FLUSH MOUNT
*NOTE: INSTALL THE CAMERA FROM THE FRONT HOLE OF THE RUBBER ANGLE MOUNT. USE THE CAMERA ADJUST TOOL TO SET THE CAMERA TO THE DESIRED POSITION.
*NOTE: THE CAMERA CABLE CAN EXIT THE METAL ANGLE MOUNT FROM THE TOP HOLE OR FROM THE BACK OF THE MOUNT.
*NOTE: THE LICENSE PLATE MOUNT HAS TWO POSITIONS TO INSTALL THE CAMERA SQUARE MOUNT TO ALLOW CLEARANCE FOR A LICENSE PLATE FRAME OR ALLOW MORE ANGLE ADJUSTMENT.
*NOTE: TO PREVENT WATER LEAK, APPLY A SMALL BEAD OF CLEAR SILICONE SEALENT AROUND THE FLUSH MOUNT BEFORE INSTALLING IT INTO THE PRE-DRILLED 25mm HOLE
SMALL O RING LARGE O RING
