5
1.
Fastening the
suction cup holder
to the back of the
monitor.
2.
Peel off the
backing paper of the
suction holder and
press it on the front
window of the vehicle.
Monitor Installation:
3.
Connect power to the monitor. There are two methods as
below:
a) Wire directly to the vehicle fuse box, paying
attention to the positive and negative polarity.
b) Use the cigarette lighter adapter to connect the
power socket of the monitor into the 12 Volt socket
of the vehicle.
4.
Power on and the power indicator lights blue. Adjust
brightness, contrast and orientation of image on the
monitor.
THE WHOLE DIAGRAM OF INSTALLATION POSITION:
For Sales Information Please Contact
RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.
Wilmington, NC 28411
(800) 507-0482 / (910) 686-4281
