4
Insert the
existing wire to
be tapped.
Insert the wire
to be attached.
Crimp tap and
then close lock
CAMERA POWER WIRE CONNECTION
1. Once you have located the reverse light circuit, you
need to route the power wire to that location. You
must securely fasten the power wire to prevent it
from being caught on a vehicle component such as the
trunk hinge. Never route the cable outside the
vehicle.
2.
The camera is equipped with Reverse Voltage
Protection. Please make sure that the RED wire is
connected to positive (+) and the Black wire is
connected to negative (-). Test by having someone
place the vehicle in Reverse. The correct wires will
have a 12 Volt DC potential only when the vehicle is
in Reverse
.
3. Wrap In-Line wire connectors over the camera power
wire.
For Sales Information Please Contact
RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.
Wilmington, NC 28411
(800) 507-0482 / (910) 686-4281
For Sales Information Please Contact
RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.
Wilmington, NC 28411
(800) 507-0482 / (910) 686-4281
