3
1
. You may mount the
camera near the top of
the license plate with
screws.
2
.
Drill six holes
:
one hole for the
camera’s power wire
and five holes for
installation of the
camera
.
3
. Insert the power
wire of the camera
into the supplied
grommet and then pass
the power wire into
the vehicle.
4
. Install the camera
with five screws
supplied and adjust
the camera to a proper
angle.
INSTALLATION
These installation instructions do not apply to all
vehicles. They are meant as only a general guide to big
vehicle makes & models. For specific questions, contact
your vehicle manufacturer. Consult your local motor
vehicle laws on the use of this product. Do not attempt
this if you are not knowledgeable with electrical
installation practices.
CAMERA INSTALLATION
Notice
•
The product is not suitable for mini vehicles.
•
For specific vehicle such as container car or
container truck, please consult your local vehicle
garage for installation.
•
Some vehicle may have a hole available to pass the
wire through, so you do not need to drill a hole.
•
Before drilling those holes, you must check and make
sure no other components are in the way. Before
drilling, we strongly recommend you check carefully
for any possible interference to avoid unexpected
damages.
For Sales Information Please Contact
RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.
Wilmington, NC 28411
(800) 507-0482 / (910) 686-4281
