USER'S MANUAL
6
yfree
Touch"
The system can be locked or unlocked by "Touching" with the PIN of 4-10 digits
• Backlight functions: If you touch Random number LED light lasts 5 seconds.
1. Lock the door
1) Touch the #9/0 until LED #9/0 lights up
2) Touch the ENTER button and then all LEDs blink 3 times and door will be locked.
2. Unlock the door
1) Enter 4-10 digits PIN code. (initial PIN "1/2, 3/4, 5/6, 7/8")
3) Touch the ENTER button and then all LEDs blink 3 times and the door will be unlocked.
•
Random Security Code is assigned to be entered before entering the PIN code
3. PIN Change (default PIN CODE "1/2 3/4 5/6 7/8")
1) Press and release the reset button on the back of the main unit.
2)
Hold down the buttons #1/2 and #3/4 at the same time on the keypad (from
outside the windshield) until all LEDs light up
3)
Enter the
New 4
-10 digits PIN code and touch the Enter button.
4)
It will indicate the assigned PIN numbers in order, and all LEDs blink 3 times.
4.
LED Scan On/Off (only works at the door lock status)
1) Hold down the button #5/6 until LED #5/6 lights up
2) Touch the Enter button until all LEDs blink 3 times.
17
Cautions
• If you make the input mistake 5 times, the system will be blocked for 10 minutes.
Then you can use the system again after 10 minutes.
• Please keep your PIN code safe when you use the Keyfree Touch
• Warranty : One year
- If it has some faults in manufacturing process, we will exchange it or fix it
for FREE and if customers make a mistake on the product and it has some
faults, we will try to fix it at the lowest price.
• This product is only an auxiliary device with convenient features,
So, vehicle owner is responsible for all kinds of the theft and damage in your car.
�
INSTALLATION �ANUAL
�
Keyfree Touch
1. Components
'
-
---
�
--
-
-
_
,_.
I
Keypad
2. Mounting Procedure
1. Before you beginning
:
:
:
·
..:.:
.
:l
;
·
,
---
Main unit
w,re
Manual
- Manufacturer and Seller do not provide vehicle wiring information for each car,
since there are many different makes and models of vehicles.
- The principle of Keyfree touch sends the pulse signal to lock or unlock the door.
So don't connect the signal line (Brown or Orange) to the lock or unlock power line of
vehicle.
- Recommend to inquire of and install at local car service centers. (remote engine start,
car security, car alarms)
• For DIY, please find vehicle wiring diagram at web. (Site may vary due to web owner)
ex) http://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.aspx
http://www. the12volt.com/installbay/vehicles.html
Black
(-) System Ground Input
2
Red
(+12V) System Power Input
(at Key box)
3
Brown
(·) Unlock Signal Output
4
Orange
(·) Lock
Signal Output
5
·Blue
(-) Aux 1 output for Engine lock (as option)
6
-White
(-) Aux 2 output for Engine lock (as option)
3. Find the three lines and ground in your car and connect to the wires from the harness.
- Lines: +12V constant Power, Power lock signal, Power unlock signal
- Ground: Connect the Black wire from the harness to the clean chassis ground
4. Plug the connector from harness to the main unit and check the operation status.
-Align the white wire of the connector to the arrow mark on main unit (all LEDs light up)
- In case of no response, unplug the connector, re-connect it or check the connection.
(initial one time to adjust the sensitivity)
- If proper operation, Unplug the connector
Ver. 2
