24
Cleaning, maintenance and repair
Sprühboy 04s - Airless Edition 10.12
5.6
Exchanging the seal kit
The seal kit may only be exchanged
•
by skilled technical personnel.
•
in the unpressurized state.
- Separate the implement from the external
compressed air source.
- Manually slacken the bayonet cap (1) and
remove.
- Actuate the spray gun and thus discharge the
residual air pressure out off the system.
- The head part (2) rotate counter clockwise and
solve, such as a universal filter wrench (not with a
pipe wrench).
- Hang out the head part on the spray gun body (3).
- Pull out the seal kit (4) from the head part.
- Re-insert the new seal kit into the head part.
- Mount the head part (2) on the spray gun body.
- Tighten the head part by hand. Observe here the
rotation locking mechanism. Through the proper
screwing of the head part the seal kit will be
pressed in his seat.
- Screw the bayonet cap back onto the spray gun
and tighten manually.
