Putting into operation
19
Jelly power pack Edition 09.09
4.8
Setting the spraying pressure
- Setting the desired spraying pressure via turning
knob (1).
To set the spraying pressure, slightly
pull out the turning knob (1) and turn it
into the desired direction.
•
To increase the spraying pressure -
turn the turning knob clockwise (+).
•
To reduce the spraying pressure -
turn the turning knob anti-clockwise
(-).
- You can read the spraying pressure set on the set
pointer (2) of the pressure gauge (3).
Summary of Contents for Jelly power pack
