18
Putting into operation
Jelly power pack Edition 09.09
4.7
Setting the processing
temperature
- Choose the desired processing temperature on
the temperature display (1).
- For this press the SET-key (2), hold pressed
and simultaneously press the UP- or DOWN-
key (3 or 4).
With the 1st pressure on the UP- or
DOWN-key the temperature display
moves in 0,1°C steps into the desired
direction forward or backward. By
pressing the same key again, the display
continuously moves until the key is
released.
- After having obtained the desired processing
temperature first release the UP- or DOWN-key (3
or 4) and only then release the SET-key (2).
A change of the processing temperature
will only become effective if you
•
have first pressed the SET-key (2),
held and simultaneously pressed the
UP- or DOWN-key (3 or 4) while
selecting the processing temperature.
•
have first released the UP- or DOWN-
key (3 or 4) and only then the SET-key
(2)
on
reaching
the
desired
processing temperature.
Summary of Contents for Jelly power pack
