16
Putting into operation
Jelly power pack Edition 09.09
4.5
Connect the one-way jelly
container BIB
To avoid malfunction ensure that the
jelly is cold, liquid, lump free and free
from foreign particles.
- Remove the screw lid (1) and the ring pull (2) of
the jelly container (3)
- Screw the adapter (4) onto the jelly container (3).
- Place the jelly containers into the holder (5), so
that the adapter (4) is located below.
- Connect the adapter (4) and the suction-hose (6)
via the coupling plug (7).
- For this, simply push the socket (8) from the
suction-hose (6) onto the plug (9) from the
adapter (4) until the quick-action locking device
noticeably locks.
To unlock, push down the socket's
push-knob (10) at the suction-hose.
When the coupling plug is separated, a
return valve integrated in the socket (8)
and in the plug (9) prevents on outflow
of jelly.
Summary of Contents for Jelly power pack
