Boyens Backservice Jelly power pack, Instruction Manual

Page: 15 / 44

Putting into operation
15
Jelly power pack Edition 09.09
4.4 Connecting the implement to an
external compressed air source
It is imperative that you comply with the
chapter "General requirements on the
compressed air source", page 14.
During the spraying procedure, the
implement
must be permanently
connected with the external compressed
air source as otherwise, spraying will
not be possible.
The bleed valve in the implement
housing cover opens if the maximum
permissible implement pressure of 6 bar
is exceeded.
- Connect the compressed air supply (1) to an
external compressed air source.