BOXLIGHT MimioDisplay 3, Installation & User Manual, Page: 27 / 36

Software
MimioDisplay 3 Installation and User Guide 27
Area Feature Screenshot
Side Toolbar >
Settings >
HDMI EDID
Change the HDMI EDID (Extended Display
Identification Data
– it describes the
capabilities of the display to the source of
video) from EDID 2.0 to EDID 1.4, and back
again.
Side Toolbar >
Settings >
HDR
Change the HDR (High Dynamic Range) to:
• Auto
•
Low
• Middle
•
High
•
Ref Mode
Side Toolbar >
Settings >
Sound
Settings for the MimioDisplay’s audio.
Change the:
• Volume
•
Balance
• Bass
•
Treble
Select whether the Output be set to internal
or external speakers. If External is selected
the current source’s audio will be outputted
to SPDIF, Audio Out 3.5mm and HDMI OUT.
The settings above apply to both outputs,
irrespective of the source.
Side Toolbar >
Settings >
System
Syste m settings for the MimioDisplay’s select
an option to change or configure:
1.
WLAN
2.
Ethernet
3.
Hotspot
4.
Bluetooth
5.
Security & Privacy
6.
Advanced Settings
7.
Time & Date
8.
Language & Keyboard
9.
Power Settings
10.
System