manualshive.com logo in svg

Bounty Hunter DISCOVERY 2200, Owner'S Manual, Page: 8 / 20

Share
Download
Bounty Hunter DISCOVERY 2200 Owner'S Manual Download Page 8

8

VI. Wave the Nail over 

the Search Coil

a. The Nail will not be detected.
b. The Nail has been "Discriminated Out."

VII. Press the 

“DISCRIMINATION-

▲

” 

touchpad twice.

Three “R”s are now 
displayed.

VIII. Wave all objects over the Search Coil

The Nail and Pull-Tab will not be detected.
The other objects will be detected with their own distinctive tones.

IX. Press the NOTCH touchpad.

A flashing “R” will appear 
under the 5¢/PT segment.

X. Press the DISCRIMINATION 

▲

touchpad three times.

The flashing “R” will move
to the ZINC segment.

XI. Press the NOTCH touchpad again.

The “R” will appear under zinc.

XII. Wave the zinc penny over the search coil. 

The penny is discriminated out.

XIII. Press the DISC A-M touchpad

The detector returns to ALL-METAL mode. No “R”s are displayed.

All types of metals will be detected.

XIV. Wave the pull-tab over the coil.

XV. Press the ZAP touchpad.

An “R” will appear.

XVI. Wave the pull-tab over the 

search coil again.

The pull-tab (the most recently detected item) is eliminated from
detector.

QUICK-START DEMONSTRATION (continued)

Summary of Contents for DISCOVERY 2200





















Reviews:

No comments