9E-864C
StepMetrix™ Installation Instructions
18
2. Install rigid PVC conduit (dealer supplied) to protect the
antenna cable from co w traffic and ro ute the cabl e to
the StepMetrix controller antenna (see Figure 18).
2.2.6
Installing the StepMetrix ISO ID Controller
— NOTE ———————————————————
⎯⎯⎯
Route wiring through conduit for protectio n and aesthetic
purposes.
1. Select a location to mount the StepMetrix controller
where the ce nter of the bot tom of the b ox is no mor e
than 70” (1500 mm) from the top of the StepMetrix ISO
ID antenna. The controller should be out of reach of
cow traffic but accessible for service.
2. Using suitable fasteners, mount the controller securely
to a sturd y structure or wall in a way that allo ws the
least amount of vibration to the controller.
3. Connect the flex conduits from the Ste pMetrix ID
antenna and the se nsor module to the bottom of the
controller (see Figure 19).
19.
Installing the StepMetrix™ ISO ID controller
l864_22
