Boston Scientific 6498 Patient Manual Download Page 8

Page: 8 / 64

LATITUDE

Communicator Patient Manual

When to Use Your Communicator

The Communicator performs many functions

automatically on a regular schedule that is set by

your health care provider. Other functions require you

to respond when the indicators on the front of the

Communicator light or flash. Check the Communicator

daily to see if any of the indicators are lit or flashing.

Use the Communicator only as instructed by your

health care provider. The Communicator’s Heart button

(Figure 1 on page 9) may flash if it needs you to

manually complete a scheduled interrogation of your

implanted device. If the Heart button is flashing, press

it and then watch the indicators on the Communicator.

Call your health care provider if the Call Doctor icon

(Figure 2 on page 10) is lit.

When Not to Use Your Communicator

The Communicator is designed to work only with your

implanted device. It will not work with another patient’s

implanted device. The Communicator should be used

only as authorized by the prescribing physician. The

Communicator is not for use with any pulse generator

other than a Boston Scientific device.

Ask your health care provider if you have questions

about any risks with using the Communicator or your

implanted device. There is also valuable information

about risks and reliability in the patient handbook for

your implanted device.

Summary of Contents for 6498

































































Search results

Summary of Contents for 6498

Reviews:

Related manuals for 6498

Brands by name

Popular brands

Boston Scientific 6498, Patient Manual

Search results

Summary of Contents for 6498

Reviews:

Related manuals for 6498

Brands by name

Popular brands