Boston Scientific 6498 Patient Manual Download Page 6

Page: 6 / 64

LATITUDE

Communicator Patient Manual

The Communicator does not reprogram or change any

functions of your implanted device. Only your health

care provider can do this during an office visit.

Your Communicator is designed to be used only in the

United States, Canada, and Puerto Rico.

The telephone (land line) feature of the Communicator

is designed to operate on standard telephone lines

like those found in most homes. The Communicator

supports tone dialing over an analog line. The

Communicator may work on other telephone systems,

such as Digital Subscriber Line (DSL) and Voice over

IP (VoIP), if those systems provide an analog interface

for connecting the Communicator.

Read the instructions in this manual

thoroughly before using the Communicator.

Keep all of your LATITUDE information in a

convenient location for easy access in the

future.

Items You Should Receive

The following items are included with the

Communicator:

• Communicator unit
• AC adapter (GlobTek

Model GTM41060-1505)

•  Communicator installation guide
•  Communicator patient manual (this book)
•  Accessories:

• Communicator telephone cord

Summary of Contents for 6498

































































Search results

Summary of Contents for 6498

Reviews:

Related manuals for 6498

Brands by name

Popular brands

Boston Scientific 6498, Patient Manual

Search results

Summary of Contents for 6498

Reviews:

Related manuals for 6498

Brands by name

Popular brands