Boston Scientific 6498 Patient Manual Download Page 59

Page: 59 / 64

LATITUDE

Communicator Patient Manual

other equipment complies with CISPR (Special

International Committee on Radio Interference)

emission requirements.

• This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference that

may cause undesired operation.

•

If your home has specially wired alarm equipment

connected to the telephone line, ensure the

installation of the Communicator does not disable

your alarm equipment. If you have questions

about what will disable alarm equipment, consult

your telephone company or a qualified installer.

•

The telephone company may make changes in

its facilities, equipment, operations or procedures

that could affect the operation of the equipment.

If this happens the telephone company will

provide advance notice in order for you to make

necessary modifications to maintain uninterrupted

service. If the equipment is causing harm to the

telephone network, the telephone company may

request that you disconnect the equipment until

the problem is resolved.

•

This equipment has been tested and found to

comply with applicable safety portions of the IEC

60601-1:2005 standard.

•

This equipment has been tested and found to

comply with the following EMC standards: IEC

60601-1-2:2007.

•

Accessory equipment connected to the analog

and digital interfaces (signal inputs and signal

outputs) must be certified according to the

Summary of Contents for 6498

































































Search results

Summary of Contents for 6498

Reviews:

Related manuals for 6498

Brands by name

Popular brands

Boston Scientific 6498, Patient Manual

Search results

Summary of Contents for 6498

Reviews:

Related manuals for 6498

Brands by name

Popular brands