Boston Scientific 6498 Patient Manual Download Page 52

Page: 52 / 64

LATITUDE

Communicator Patient Manual

CAUTIONS:

• Do not use other cleaning fluids. They may

damage the front lens of the Communicator.

Never spray any cleaning fluid directly on the

Communicator front lens. Do not allow moisture

to accumulate on or around the lens or Heart

button.

• Avoid using any cleaning fluid near the electrical

plugs on the back of the Communicator.

Returning or Replacing the Communicator

If your Communicator becomes damaged or it

malfunctions, contact your health care provider

for return and replacement instructions. Your

Communicator may contain encrypted personal health

information.

Communicator Disposal

•

United States.

If your Communicator is not

damaged, dispose of it properly at a local

recycling site that accepts electrical and electronic

equipment. Do not throw the Communicator in

the trash. Many areas of the country have set up

recycling sites to collect and recycle electrical and

electronic waste. Contact your local authorities for

further collection information.

• Canada. Do not dispose of the Communicator. If

return or replacement is necessary, contact your

health care provider.

Summary of Contents for 6498

































































Search results

Summary of Contents for 6498

Reviews:

Related manuals for 6498

Brands by name

Popular brands

Boston Scientific 6498, Patient Manual

Search results

Summary of Contents for 6498

Reviews:

Related manuals for 6498

Brands by name

Popular brands