Boston Scientific 6498 Patient Manual Download Page 51

Page: 51 / 64

LATITUDE

Communicator Patient Manual

Care and Maintenance

To ensure optimum performance of your Communicator

and protect it from damage, follow these directions:

CAUTIONS:

• Do not drop or mishandle the Communicator in a

manner that would cause damage.

•

Avoid getting liquid on the unit other than cleaning

it as recommended. Do not use abrasive cloth or

solvents to clean the unit.

• Do not submerge the Communicator in liquid.
• Do not attempt to open the Communicator.
•

Use this unit as described in this instruction

manual. Use only authorized parts and

accessories. Do not attempt to modify or alter this

unit or accessories.

If your Communicator becomes damaged or it

malfunctions, contact your health care provider.

Cleaning the Communicator

When necessary, clean the Communicator with a

soft, clean, lint-free cloth moistened in water or mild

detergent. Note that the finish on some types of

furniture could be affected as a result of continuous

contact with rubber material such as the type used on

the base of the Communicator.

Summary of Contents for 6498

































































Search results

Summary of Contents for 6498

Reviews:

Related manuals for 6498

Brands by name

Popular brands

Boston Scientific 6498, Patient Manual

Search results

Summary of Contents for 6498

Reviews:

Related manuals for 6498

Brands by name

Popular brands