6
RX67/RX67DIN Mounting Screw Locations
Factory speaker locations for 6-inch (160mm & 165mm) speakers provide various screw holes for mounting the
speaker. The RX67 and RX67DIN include several different sets of holes. Rotate the speaker until the correct
holes line up.
4-hole pattern
3-hole pattern
RX47 Notice
The RX47 is supplied with the grille adapter ring attached to the metal basket of the speaker. For many
factory cutouts, this adapter ring will have to be removed for installation.
1. Hold the speaker between both of your palms with the speaker cone facing you.
Hook your fingers
behind the magnet assembly.
2. Push one locking tab out and back with your thumbs to release it from the speaker frame (see
diagram).
Repeat this on all sides of the adapter until the adapter falls free.
