22
Creating “Custom” Wah Effects (Customize Mode)
You can change existing wah effects to suit your own taste and playing style and even create
your own original custom wah effects.
The new wah effects made with these settings are stored to the TYPE knob “CUSTOM” set-
tings, so by turning the TYPE knob to CUSTOM, you can then use the effect just like other
wahs.
1.
With the TYPE knob, select the wah
type on which you want to base your
new effect, then set WAH RANGE and
DRIVE to the desired positions.
2.
Turn off the power to the guitar amp.
3.
Switch off the PW-10’s power.
• When running on battery power:
Disconnect the connection plug from the
INPUT jack.
• When running on power from an AC
adaptor:
Disconnect the plug from the AC Adaptor
jack.
4.
Turn the TYPE knob to CUSTOM.
5.
While holding down the MANUAL/
MEMORY button, switch on the PW-
10’s power.
• When running on battery power:
Insert the connection plug into the INPUT
jack.
• When running on power from an AC
adaptor:
Insert the AC adaptor plug into the AC
Adaptor jack.
The ON/OFF indicator blinks seven
times, and the PW-10 switches to Custom-
ize mode.
6.
Turn on the power to the guitar amp.
Summary of Contents for V-Wah PW-10
Page 42: ...42 Setting Memo ...
Page 44: ...G6017356 ...
