background image

Safety

 

 

 
 
 

 
 
 
 
 
 

Serious injury or death can result if you do not follow these instructions and procedures which are outlined 
further within your own

er’s

 manual. 

 

  NEVER get body parts between Plow System and vehicle while servicing or operating. 

 

  NEVER position body parts between moving parts of the Plow System while servicing or 

operating. 

 

  NEVER use a loader exceeding a Gross Vehicle Weight Rating of 80,000lbs. Exceeding 

this GVWR could result in an accident or damage. 

 

  Read this manual and all labels carefully.  Follow the operating procedures described. 

 

  Follow all Operator Safety instructions found in your Loader Owner

s Manual. 

 

  When transporting, position plow so as not to block vision

 

  NEVER change blade position when transporting

 

  NEVER exceed 14 mph when plowing snow. 

 

  NEVER exceed 5 mph while changing blade position. 

 

  Make sure plow is properly attached and secured before moving vehicle. 

 

  NEVER operate plow with loose binders or chains. 

 

  Always lower blade when vehicle is not in use. 

 

  NEVER ride on Plow System. 

 

  NEVER lift persons on Plow System. 

 

  NEVER operate on steep inclines. 

 

  Operators should always use vehicle seat belts and all other applicable personal 

protective equipment while operating plow. 

 

  Always remove plow from machine before servicing. 

 
 
 
 
 
 
 
 
 
 

 

Summary of Contents for LDR 14/16

















Reviews: