Boss LDR 14/16, Installation & Owner'S Manual

Page: 12 / 16

Maintenance and Storage
12
Maintenance
Your BOSS PLOW is designed for reliable service
with minimal maintenance. To ensure that it gives
you the same high performance year after year,
please use it properly and observe the following
maintenance precautions.

Inspect the following on a regular basis:

All fasteners, pins, retainers, nuts and bolts
for tightness.
See Recommended Bolt Torque
located in this manual.

Cutting edge wear.

Wing shoe wear.

Apply grease to slip hitch assembly and
wing hinge bushing. See Figure 2 and
Figure 4.
Putting the Plow into Storage
1. Drive the snowplow to a storage site. Follow
the normal procedure for dismounting from
the plow.
2. Touch-up any rust spots or chipped paint.
3. Loosen the trip springs.
4. Grease the slip hitch assembly and wing
hinge bushings.
Taking the Plow out of Storage
1. Check all fasteners for tightness.
See
Recommended Bolt Torque located in this manual.
2. Tighten the trip springs.
3. Grease the slip hitch assembly and wing
hinge bushings.