86
Chapter 7 Changing Effect Settings
The JS-5 features “Reverb,” “Chorus,” and “Insert Effects” as
internal effects. This chapter explains the procedures used to
change the settings for these effects.
* You cannot apply effects to the Audio track.
To save the modified settings
If you modify the settings of a user song, the modified
content will be lost when you switch to another song/style.
If you wish to keep the settings, use the following procedure.
1.
Press [REC], getting the button to light.
* To cancel, press [EXIT].
2.
Press [STOP].
The following screen will appear, and the settings will be
saved.
fig.RE06-50
When the settings have been saved, you will return to
the previous screen.
Never turn off the power to the JS-5 or remove the memory
card from the JS-5 while the “
” still appears at the left of
the display (when data is being written), as this can prevent
the data from being written properly, and may adversely
affect later operations.
If you have changed the settings for the Preset Songs, then if
you want to save the settings, copy them to a User Song (p. 82).
If you press [SHIFT] + [REC], the settings will be saved
immediately.
Changing the Reverb Settings
Select and change the reverb-related settings (parameters).
1.
Select a Song.
2.
Press [EFFECTS].
3.
Press [CURSOR] to select the parameter you want to
change.
fig.RE07-01
1 REVERB TYPE
Settings values: ROOM1, ROOM2, STAGE1, STAGE2,
HALL1, HALL2, DELAY, PAN-DELAY
fig.RE07-02
2 REVERB TIME
Settings values: 0–127
fig.RE07-03a
3 REVERB LEVEL
Settings values: 0–127
fig.RE07-03b
4 REVERB FEEDBACK
Settings values: 0–127
fig.RE07-03c
5 REVERB HF DAMP
Settings values: 0/250/315/400/500/630/800/1000/
1250/1600/2000/2500/3150/4000/
5000/6300/8000 Hz, BYPASS
4.
Turn [VALUE] to change the settings value.
* If you wish to save the settings, execute the Save procedure.
