31
Settings Made When the Power is Switched ON
Setting the External Pedal Function
You can connect an optional foot switch (the FS-5U or FS-5L) to the CTL PEDAL
jack and use the pedal for turning the effects on and off, for tap input, and for
switching memories.
fig.45 Polarity switch
1.
Switch off the power.
2.
While holding down the MEMORY/TAP pedal, switch on the power.
The setting is indicated in the display, and the MEMORY 1–3 indicator
corresponding to the current setting flashes.
3.
Set the external pedal function pressing the SELECT button.
Each time you press the SELECT button, it switches through the “ON/OFF,” and
“TAP,” “MEM.”
fig.46
or
Set the polarity switch as
shown in the following figure.
Connection cord
(1/4 inch phone type)
CTL 1
CTL 2
CTL 3
Summary of Contents for Giga Delay DD-20
Page 40: ...40 Setting Memo fig 36 fig 36 fig 36 ...
Page 44: ...G6017366 03 2 FA1 11N ...
