27
Indicating the BPM in the Delay Time Display
You can switch the DD-20’s time delay display to show the tempo (BPM).
If, for example, you already know the BPM of the song you are performing, you
can get a perfectly synchronized delay effect by setting the delay time with the
indicated tempo (BPM).
* Specifying the note lengths with the TEMPO button also makes it easy to specify the times
for dotted notes, triplets, and other kinds of notes.
1.
Hold down the TAP button until the delay time indicated in the display
changes to show the tempo (BPM).
fig.41
Use this same procedure to return to the time (msec) display.
When the delay time is saved after switching the display, the method used to
display it is also saved.
Summary of Contents for Giga Delay DD-20
Page 40: ...40 Setting Memo fig 36 fig 36 fig 36 ...
Page 44: ...G6017366 03 2 FA1 11N ...
