14
Operation
MEMORY/TAP Pedal Operation
(Switching Memories)
The Pedal mode (1–3) changes the function of the pedals. Use the most appropriate
setting for your particular application.
* The following operations are performed while the MEMORY indicator is lit.
* The DD-20 features a “seamless switching function.”
When you switch memories using this function, the reverberation from the memory prior to
switching continues to sound, for more natural-sounding transitions.
* At the factory settings, Pedal mode is set to “1.”
When changing the Pedal mode settings, refer to p. “Changing the Pedal Mode Settings”
(p. 29).
Pedal mode: 1
Pressing the MEMORY/TAP pedal cycles you through a series of selections, in this
order: MANUAL
→
MEMORY 1
→
MEMORY 2
→
MEMORY 3
→
MEMORY 4
→
MANUAL. This convenient feature makes it easier to switch memories in which
multiple memories are used.
fig.9
Pedal mode: 2
Pressing the MEMORY/TAP pedal switches you between MANUAL and the
selected memory (shown by the lit indicator). This is a convenient way to toggle
between two sound settings.
fig.10
MANUAL
MEMORY 1
MEMORY 2
MEMORY 3
MEMORY 4
MANUAL
MEMORY
Summary of Contents for Giga Delay DD-20
Page 40: ...40 Setting Memo fig 36 fig 36 fig 36 ...
Page 44: ...G6017366 03 2 FA1 11N ...
