Boss Solar Strip Thermal Solar Pool Heating | INSTALLATION MANUAL
4
Revision:
C
Revision Date:
18/11/2021
INSTALLING THE SYSTEM
SYSTEM CONFIGURATION
Review the below solar configurations and select the system that will best suit your roof shape.
All systems must be plumbed with a feed header, return header and a balance pipe to ensure complete and even
water flow throughout the collector.
Bottom Feed Loop Return
This plumbing configuration provides:
•
Even water flow throughout the collector
when the pump is
switched on
, and
•
swift and efficient drain down back to the
pool when the pump is
switched off
•
Configuration can be installed over multiple
roof faces
Depending on the roof shape and size, the
installer has the choice to install the Bottom
Feed Solar System in several different
configurations:
This configuration should be adopted
wherever possible.
Bottom Feed System
– “U” Loop Configuration
Bottom Feed Butterfly
This plumbing configuration provides:
•
Swift and efficient drain down back to
the pool when the pump is
switched
off
•
Efficient use of available roof space
on triangular or odd shaped roofs
•
Configuration can be installed over
multiple roof faces
Note: Configurations with varying loop run
lengths may result in reduced system
efficiency and performance
Bottom Feed System
– Butterfly Configuration
Bottom Feed System
– Butterfly Configuration
Multiple roof surfaces
Summary of Contents for PROSOLAR
Page 1: ......
