Attach blade to TUFFBRACE by Inserting 4 hex bolts (1/4”x3/4”)
(A)
into the 4 holes in the middle of the
blade and fasten to TUFFBRACE with 4 locknuts
(B)
THE SNOW PLOW SNOW PUSHER BOSS EDITION
ASSEMBLY INSTRUCTIONS
3.
Insert handle into TUFFBRACE.
4.
Drill a 1/4” hole in middle dimple on the backside of
the TUFFBRACE with provided 1/4” Drill Bit
(E)
.
5.
Secure handle to TUFFBRACE with 2 screws (3/4”)
(C)
Insert Hex Bolt (1/4”x2”)
(D)
in drilled hole and fasten
with locknut
(B)
.
NOTE: Screw the two self tapping screws
in the dimple sections on the back of the
TUFFBRACE handle.
A
A
A
B
A
B
B
B
B
A
C
E
D
B
C
Insert remaining hex bolt
(A)
in the top blade hole and fasten to TUFFBRACE with locknut
(B)
.
1.
2.
™
