g374608
Figure 13
Kickstand
g370736
Figure 14
1.
Kickstand spring pin
The kickstand keeps the plow upright for ease of
mounting and storage. To raise or lower the kickstand,
pull the kickstand spring pin and move the kickstand
to the desired position. Release the spring pin to lock
the kickstand in place.
Operation
Mounting the Plow
Refer to the
Mounting the Plow (page 5)
section
above.
Removing the Plow
1.
Stop machine on a level surface.
2.
Lower the plow until the cutting edge is 2.5 to 5
cm (1 to 2 inches) from the ground.
3.
Shut off the engine, wait for all moving parts to
stop, engage the parking brake, and remove
the key.
4.
Disconnect the hydraulics.
5.
Lower and lock the kickstand.
6.
Pull the coupler pins and turn it 90° until the plow
is disconnected from the machine.
g373484
Figure 15
7.
Start the machine, lower the attachment coupler,
and slowly back away from the plow.
8.
Arrange the hydraulic hoses and disconnects so
that they are not resting on the ground.
Operating Tips
•
Become familiar with the area you are plowing;
hidden obstructions such as curbs and pipes can
damage your plow or machine.
•
Do not let snow accumulate; always plow with the
storm.
•
Lower the plow when not in use to prevent possible
injury.
•
Always plow at a safe speed in case you hit hidden
obstructions.
•
When transporting the machine, do not block your
vision with the plow.
8
