Boss Audio Systems Digital Recording Studio BR-1600 CD, Owner'S Manual

Page: 263 / 312

263
Section 7
Changing the content of the level meter display (Pre/Post Fader)
Normally, the level meters for the tracks, which are
displayed on the top screen, will indicate the levels that the
various signals have after they have passed through the
corresponding faders (i.e., the post-fader volumes).
You can, however, use the following procedure to have the
levels that the signals are at before they pass through the
faders (i.e., pre-fader volumes) be displayed.
fig.53-13
1.
Press [UTILITY].
The Utility screen will appear.
fig.12-12d
2.
Move the cursor to the SYSTEM icon and press
[ENTER/YES].
Alternatively, you can press [F1] (SYSTEM) if the
SYSTEM icon is currently displayed.
The System Parameter screen will appear.
fig.10-03d
3.
Move the cursor to “Level Display” and select “PRE
FADER” using the TIME/VALUE dial.
fig.53-16d
PRE FADER:
The levels that signals have prior to reaching the faders
are displayed.
POST FADER:
The levels that signals have after passing through the
faders are displayed. This is the setting on the BR-
1600CD at the time of purchase.
4.
Press [EXIT/NO] several times to return to the top
screen.
1
2
4
2, 3
3
BR-1600_R_e.book 263 ページ ２００７年１２月６日 木曜日 午前９時５２分