58
Using Insert Effects
The BR-800 lets you change the location of the insert effect,
allowing you to use it for a variety of different purposes.
1
In the EFFECT screen, press the CURSOR [
]
button to move the cursor to “LOCATION,” and
press the [ENTER] button.
The LOCATION screen will appear.
D_Effect_Location.eps
2
Turn the dial to specify the location in which the
insert effect will be connected.
3
Press the [EXIT] button a number of times to return to
the play screen.
* The display will indicate “Keep power on!” while the data is
being updated. Do not turn off the power while this message
is displayed.
■
INPUT <NORMAL>
This setting lets you monitor the sound that has passed
through the insert effect, and the sound that has passed
through the insert effect will be recorded. Normally, you
should use this setting.
fig.03-110.eps
■
INPUT <REC DRY>
This setting lets you monitor the sound that has passed
through the insert effect, but the sound unprocessed by the
effect (i.e., the dry sound) will be recorded. Use this setting
if you want to try out various effects after recording.
fig.03-120.eps
■
TRACK 1–8, 1/2, 3/4, 5/6, 7/8,
1–4, 5–8, 1–8
These settings apply the insert effect to the sound played
back from the track. Use these settings when you want to
try various effects after recording the dry sound, or when
you want to apply an effect only to a specific track.
* Depending on the selected combination of effect and bank,
the effect might not apply to all tracks.
fig.03-130.eps
■
RHYTHM
This setting applies the insert effect to the rhythm sound.
fig.03-140.eps
■
MASTER
This setting connects the insert effect immediately before
the mastering effect (p. 112). Use this setting when you
want to apply the insert effect to the overall sound, such as
when adjusting the tone quality during mastering, or to
obtain a special effect.
fig.03-150.eps
Changing the Location of
the Insert Effect (LOCATION)
Insert Effect Connection
Locations
TRACK 1
(REC)
TRACK 1
(REC)
TRACK 1
(PLAY)
RHYTHM
TRACK 1
(PLAY)
TRACK 8
(PLAY)
RHYTHM
BR800_e.book 58 ページ 2010年11月2日 火曜日 午前8時28分
Summary of Contents for BR-800
