Boss Audio Systems BR-800, Owner'S Manual

Page: 106 / 164

106
Editing
■
Erasing track data
1
Press the [TRACK] button.
2
Use the CURSOR [ ] [ ] buttons to move the
cursor to “TRACK EDIT,” and press the [ENTER]
button.
D_Track_Edit_Copy.eps
3
Use the CURSOR [ ] [ ] buttons to move the
cursor to “ERASE,” and press the [ENTER] button.
4
Use the CURSOR [ ] [ ] buttons and the dial to
select the track/V-track that you want to erase.
D_Track_Erase.eps
5
To erase, press the [ENTER] button.
A message will ask “Are you sure?”
6
Press the [ENTER] button.
The data will be erased.
* The display will indicate “Keep power on!” while the data is
being updated. Do not turn off the power while this message
is shown.
7
Press the [EXIT] button a number of times to return to
the play screen.
■
Importing song sketch data into a
track
1
Press the [TRACK] button.
2
Use the CURSOR [ ] [ ] buttons to move the cursor
to “TRACK EDIT,” and press the [ENTER] button.
D_Track_Edit_Copy.eps
3
Use the CURSOR [ ] [ ] buttons to move the
cursor to “SONG SKETCH IMPORT,” and press the
[ENTER] button.
4
Use the CURSOR buttons and the dial to specify how
the data is to be imported.
D_Track_Inport.eps
5
To import the data, press the [ENTER] button.
A message will ask “Are you sure?”
6
Press the [ENTER] button.
The data will be imported.
* While the data is being updated, the display will indicate
“Keep power on!” Do not turn off the power while this
message is shown.
7
Press the [EXIT] button a number of times to return to
the play screen.
Parameter Explanation
DISP
Select the units indicated by START.
Choose either TIME or MEASURE.
SOURCE
The song sketch data that will be im-
ported
DEST
The track into which the data will be
imported
START
The location at which the data will be
inserted into the import-destination
track.
BR800_e.book 106 ページ ２０１０年１１月２日 火曜日 午前８時２８分