background image

 

155

 

Editing

Mastering

Using USB

Con

venient 

Functions

Appendix

es

Quic

k Star

t

Getting Read

to Recor

d

Recor

ding/

Pla

ybac

k

Using 

Eff

ects

Using 

Rh

ythm

 

Error Message List

 

An error message will appear in the display if you attempt to perform an invalid operation or if an operation could not be 
executed correctly.

Take the appropriate action for the message that appears.

 

Message

Cause

Action

Page

Already exists!

 

There is a file of the same name.

Create the file using a different name.

 

Battery low!

 

The operating batteries have run 
low.

Replace the batteries as soon as possible.

p. 19

 

Cannot change 
file name!

 

The file name contains some charac-
ters which are incompatible with BR-
800 or the file name is too long (File 
name (excl. extension) should be 
within eight characters).

Please change the file name with using your com-
puter.

p. 124

 

Cannot erase!

 

You attempted to erase a step from a 
song arrangement that contained 
only one step.

Enter two or more steps before erasing a step.

p. 96

You attempted to erase a step from a 
song arrangement that contained no 
data.

Erase a step that contains data.

p. 96

 

Cannot insert!

 

The song arrangement exceeded 50 
steps.

A song arrangement cannot have more than 50 
steps.

p. 96

The song arrangement exceeded 999 
measures.

A song arrangement cannot have more than 999 
measures.

p. 96

 

Cannot undo!/
redo!

 

Undo/Redo is not possible when 
there is no editing history.

Perform undo/redo after you’ve left an editing his-
tory.

 

Card full!

 

Recording or copying is not possible 
because there isn’t enough free space 
on the SD card.

Back up important data to your computer, and de-
lete unwanted data from the card.

p. 126

 

Card locked!

 

Writing or erasure cannot be per-
formed because the SD card’s Lock 
feature is on.

Turn off the power, remove the SD card, and turn 
Lock off.

p. 147

 

Card read 
error!

 

Data could not be read correctly 
from the SD card.

Turn off the power, reinsert the SD card securely, 
and then turn on the power again.
If the same message appears even after you’ve per-
formed the above action, the SD card may be dam-
aged.

p. 146

Format the SD card.
If the same message appears even after you’ve per-
formed the above action, the SD card may be dam-
aged.

p. 139

 

Card write 
error!

 

An error occurred while writing data 
to the SD card.

Format the SD card. The song data you were 
attempting to save will be lost.
If the same message appears even after you’ve per-
formed the above action, the SD card may be dam-
aged.

p. 139

 

Data too short!

 

You attempted to import a WAV file 
that was shorter than one second.

The WAV file must be longer than one second for it 
to be imported.

BR800_e.book 155 ページ 2010年11月2日 火曜日 午前8時28分

Summary of Contents for BR-800





































































































































































Reviews: