Enabling standby (low power) mode
Applies to:
SoundTouch 30 wireless speaker
SoundTouch 20 wireless speaker
You can enable standby (low power) mode by removing the Ethernet cable,
disabling Wi-Fi and clearing the
Bluetooth
® pairing list. Disabling Ethernet and Wi-
Fi will prevent the system from connecting to your network, as well as preventing
the system from being controlled by the SoundTouch® app until Ethernet and Wi-
Fi are re-enabled.
Disable Wi-Fi: On the speaker, press and hold "
3
" and
Volume down
until the Wi-
Fi indicator turns off
Deactivate
Bluetooth
:
Deactivate
Bluetooth
by clearing the pairing list. Press and
hold the
Bluetooth
button on the speaker until the
Bluetooth
indicator blinks
white
