9
PART LIST NOTES
1.
This part is not normally available from Customer Service. Approval from the Field Service
Manager is required before ordering.
2.
The individual parts located on the PCBs are listed in the Electrical Part List.
3.
This part is critical for safety purposes. Failure to use a substitute replacement with the
same safety characteristics as the recommended replacement part might create shock, fire
and/or other hazards.
4.
This part is referenced for informational purposes only. It is not stocked as a repair part. Refer
to the next higher assembly for a replacement part.
ELECTROSTATIC DISCHARGE SENSITIVE (ESDS)
This unit contains ESDS devices. We recommend the following precautions when repairing,
replacing or transporting ESDS devices:
•
Perform work at an electrically grounded work station.
•
Wear wrist straps that connect to the station or heel straps that connect to conductive
floor mats.
•
Avoid touching the leads or contacts of ESDS devices or PC boards even if properly
grounded. Handle boards by the edges only.
•
Transport or store ESDS devices in ESD protective bags, bins, or totes. Do not insert
unprotected devices into materials such as plastic, polystyrene foam, clear plastic bags,
bubble wrap or plastic trays.
DEVICE HANDLING
PRODUCTION NOTES
The PackLite
TM
A1 amplifier has been manufactured in two versions, a 120V version (product
code 039057) and a 220-240V version (product code 039058).
The early 120V units, serial numbers 039057Z52620201AC to 039057Z52621200AC, are non-
RoHS compliant units. 120V units built after the 5262 Julian date (9/19/2005) are fully RoHS
compliant.
The 220-240V version, product code 039058, is fully RoHS compliant from the initial production
units onward.
The Electrical Parts Lists have non-RoHS and RoHS compliant part numbers in cases where
these parts are different for the two versions of the amplifier. Be sure to use ONLY RoHS com-
pliant repair parts in RoHS compliant products.
