E N G L I S H - 4 3
A P P E N D I X C : A LT E R N AT E W I R E D S E T U P
Unable to pair the Acoustimass
®
wireless
bass module with the console
If you are having issues wirelessly connecting your bass module to your console, you
can also connect it using a 3.5 mm stereo cable (not provided).
Note:
If you do not have a 3.5 mm stereo cable, contact your authorized Bose® dealer
or Bose customer service.
To install the 3.5 mm stereo cable:
1. On your remote control, press
SETUP
.
2. Select
Speaker Management
.
3. Follow the on-screen instructions until “The following steps will show you how to set
up your bass module” message displays.
4. Press
, then follow the on-screen instructions to finish setup.
Unable to pair the wireless receivers with
the console (rear speakers)
If you are unable to pair your rear speakers to the console, you can also connect them
directly to the system using a custom speaker cable (not provided). Use this method
only if you are having issues wirelessly connecting your rear speakers to your console.
Note:
To receive the speaker cable, contact your authorized Bose® dealer or Bose
customer service.
To install the speaker cable:
1. On your remote control, press
SETUP
.
2. Select
Speaker Management
.
3. Follow the on-screen instructions until “The following steps will show you how to set
up your rear speakers” message displays.
4. Press
, then follow the on-screen instructions to finish setup.
CAUTION:
Do not use any unauthorized wiring to connect the speakers to your Bose
system. Using unauthorized wires may damage your Bose system and its
components.
