background image

3

English

pro.Bose.com

 

Important Safety Instructions

16. 

When an external power supply is used to power this apparatus, that power supply shall be connected to a 

mains socket outlet with a protective earthing connection.

17. When permanently connected, an all-pole mains switch with a contact separation of at least 3mm in each pole 

shall be incorporated in the electrical installation of the building.

18. 

If rack mounting, provide adequate ventilation. Equipment may be located above or below this apparatus but 

some equipment (like large power amplifiers) may cause an unacceptable amount of hum or may generate too 

much heat and degrade the performance of this apparatus.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO 

RAIN OR MOISTURE.

Note:

 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant 

to Part 15 of the FCC Rules and EN55022. These limits are designed to provide reasonable protection against 

harmful interference when the equipment is operated in a commercial environment. This equipment generates, 

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction 

manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area 

is likely to cause harmful interference, in which case the user will be required to correct the interference at their own 

expense.

This symbol means the product must not be discarded as household waste, and should be delivered to 

an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural 

resources, human health and the environment. For more information on disposal and recycling of this 

product, Contact your local municipality, disposal service, or the shop where you bought this product.

Names and Contents of Toxic or Hazardous Substances or Elements

Toxic or Hazardous Substances and Elements

Part Name

Lead 

(Pb)

Mercury 

(Hg)

Cadmium 

(Cd)

Hexavalent 

(CR(VI))

Polybrominated Biphenyl 

(PBB)

Polybrominated 

 diphenylether  (PBDE)

PCBs

X

0

0

0

0

0

Metal parts

X

0

0

0

0

0

Plastic parts

0

0

0

0

0

0

Speakers

X

0

0

0

0

0

Cables

X

0

0

0

0

0

0: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit 

requirement in SJ/T 11363-2006. 
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is 

above the limit requirement in SJ/T 11363-2006.

©2015 Bose Corporation. All rights reserved. All trademarks are the property of their respective owners.

Summary of Contents for ControlSpace EP40-D





















Reviews: