background image

AM250811_04_V.pdf                                                         October 30, 2001                                                                          3

Where to find…

Setting Up

Before you begin ........................................................................................................... 4
Unpacking the carton ................................................................................................... 4
Tools required ............................................................................................................... 4
Selecting the location for your speakers ...................................................................... 5

Installing Your 251

TM

 Speakers

Choosing the speaker wire ........................................................................................... 6
Installing the mounting brackets ................................................................................... 6
Attaching the speakers to the brackets ........................................................................ 8
Making the connections ................................................................................................ 9

Maintaining Your 251

TM

 Speakers

Troubleshooting .......................................................................................................... 12
Warranty period .......................................................................................................... 12
Customer service ........................................................................................................ 12
Cleaning your speakers .............................................................................................. 12
Protecting the speaker wire ........................................................................................ 12

Product Information

Technical information .................................................................................................. 13

Bose

®

 Corporation .................................................................................... inside back cover

Contents

Summary of Contents for 24643

















Reviews: