
operation
en
33
14.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
Requirements
¡
A programme has been set.
¡
The programme settings have
been adjusted.
▶
Press and hold
记忆
for approx. 3
seconds.
Press
记忆
to call up the saved
programme.
Note:
To overwrite the saved pro-
gramme, repeat the steps above.
14.5 Loading laundry
Note:
To prevent creasing, take note
of the maximum load for the
→
Requirement:
The laundry is pre-
pared.
→
1.
Open the door.
Make sure that the drum is empty.
2.
Place the laundry in the drum.
3.
Close the door.
Ensure that there is no laundry
trapped in the door.
14.6 Adding detergent and
care product
For programmes in which intelligent
dosing is not possible or desirable,
you can add detergent manually.
Tip:
In addition to intelligent dosing,
you can also add additional care
product for laundry, e.g. stain re-
mover, starch or bleach, to the
manual dosing compartment. Do not
add any additional detergent to the
manual dosing compartment to avoid
overdosage and/or foaming.
Note:
Observe the information about
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
3.
If required, add the care product.
4.
Push in the detergent drawer.
14.7 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
1.
Press
.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
a
After the programme has ended,
the display shows: End.
2.
If is selected, the laundry is not
spun and the water is drained after
rinsing.
Notes
¡
If the laundry is not removed, the
Anti-Crease programme starts after
15 minutes. The programme takes
around 30 minutes. The display
shows
00:00
and appears.
Press anywhere on the display to
cancel the Anti-Crease programme
and to remove the laundry.
¡
If "Hot" appears, the appliance
cools the laundry.
When "Hot" goes out, the laundry
has cooled down.
14.8 Soaking laundry
Note:
No additional detergent is re-
quired. The washing solution is then
used for washing.
1.
Start the programme.
2.
To pause the programme, after ap-
prox. 10 minutes, press
.
Summary of Contents for XQG100-WDU286H1AW
Page 25: ...Buttons en 25 Button Selection Description Open the Home Connect menu ...
Page 62: ......
Page 63: ......