Setting the signal
en
27
M
Setting the signal
Setting the signal
1. Activate setting mode for the signal volume
Turn to
Ú
Off
.
Turn one position
clockwise.
Press and hold the ° C
turn one position clockwise.
Release the button.
2.a Set the volume for the button signals (depending on model)
Press the
0
button until the required
volume is reached.
Go to step 2.b or Set to
Ú
Off
, which exits setting mode for the
signal volume.
2.b Selecting the volume for the information signals
Turn one position clockwise
Press the
0
button until the
required volume is reached.
Set to
Ú
Off
, which exits setting
mode for the signal volume.
