background image

Laundry    

en

13

Ensure that underwired bras are 

machine-washable.

Wash delicates in a net or bag 

(tights, underwired bras, etc).

Close zips, button up covers.

Brush sand out of pockets and 

collars.

Remove curtain fittings or include in 

the net/bag.

Preparing laundry for drying

Note:  

To ensure an even drying result, 

sort the laundry according to the:

Type of fabric

Drying programme

Care symbols which are indicated on 

the care labels.

Only dry laundry which is labelled 

“dryer-proof” or which has the following 

care symbols:

a

 = Dry at normal temperature 

(

Intensive dry 

5

 )

`

 = Dry at low temperature 

(

Gentle dry 

 )

The following textiles must not be dried:

b

 = care symbol “Do not dry”

Wool or textiles containing wool.

Delicates (silk, synthetic curtains).

Textiles which contain foam rubber 

or similar materials.

Textiles which were treated with 

flammable liquids, e.g. with stain 

remover, petroleum ether, thinners. 

Risk of explosion! 

Textiles which still contain hairspray 

or similar substances.

Notes

Before drying, hand-washed textiles 

must be spun at the appropriate spin 

speed.

Before drying, spin at the optimum 

speed. A spin speed of more than 

1000 rpm is recommended for 

cotton, more than 800 rpm for easy-

care textiles.

Do not iron laundry immediately after 

drying. It is recommended to roll the 

laundry up first to distribute residual 

moisture evenly.

To ensure a good drying 

performance, quilts, terry cloths and 

other large textiles should be dried 

separately. Do not dry more than 5 

terry cloths (or 4 kg).

Do not exceed the maximum load.

Summary of Contents for WVG30460TH













































Reviews: