en
Positioning and connecting
12
5
Positioning and
connecting
Positioning and connecting
Included with the appliance
Note:
Check the machine for transport
damage. Never use a damaged
machine. If you have any complaints,
contact the dealer from whom you
purchased the appliance or our
customer services.
In addition
, a hose clamp (24 - 40 mm
diameter, available from specialist
dealers) is required to connect the
water drain hose to a siphon.
Useful tools
■
Spirit level for aligning
■
Spanner with:
– WAF13 for loosening the
transport braces, and
– WAF17 for aligning the appliance
feet
Safety instructions
:
Warning
Risk of injury!
■
The washer dryer is very heavy.
Be careful when lifting/transporting
the washer dryer.
■
When the washer dryer is lifted by its
protruding parts (e.g. the washer
dryer door), the components may
break off and cause injuries.
Do not lift the washer dryer by
protruding parts.
■
If the hose and mains cables are not
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the washer dryer in areas
exposed to frost or outdoors.
(
Mains cable
0
Bag:
■
Installation and operating
instructions
■
Customer services location
directory*
■
Warranty*
■
Cover caps for openings after
the transport braces have
been removed
8
Water supply hose on Aqua-Stop
models
3
+
#
@
Water drain hose
H
Elbow for securing the water
drain hose*
P
Water supply hose on standard/
Aqua-Secure models
*
depending on the model
